Ion snapshot

First, the word snapshot is used for the layout of displays on the Ion, which isn't exactly what you're asking.

I think your requirement can be met by adding a Block flag to the cue in question. This will prevent future edits from tracking into the cue. Range editing of cues and Trace instructions can still alter the values in the cue.

Examples:

[Cue][7][Block][Enter]

[Cue][7]{Intensity}[Block][Enter] blocks just the intensity.

On a hog I can "touch" and "suck".   With suck I can suck the output of the console into the programmer and make them all hard recorded values.

I want to grab the whole out put of the console and record it hard.

Well, there's {Select Active} and [Record] if that's what you're after. Hold down the [Select Last] key and it's one of the soft keys. I'm not sure it accomplishes the same thing as a Hog so I'll shut up now.

Well, there's {Select Active} and [Record] if that's what you're after. Hold down the [Select Last] key and it's one of the soft keys. I'm not sure it accomplishes the same thing as a Hog so I'll shut up now.

Select Active sounds like just the ticket!   Thanks.  I'll try on monday.   basicly I want to suck the whole output of the console and record it to a new cue list.

I think that would be {select active} [record] [cue] {2/1} [enter]  to record to list 2/1.  Yes?