Intensity masters

Hi there.  I'm not clear on the problem.  Are you saying that once the units are under the control of an I-Master'ed cue list, you cannot control the intensity any other way?   I just tried this out and I'm not seeing a problem.  Can you please explain?  And let me know what type of LED device you are working with?

Thanks much!

a

Anne,

Thanks for getting back to me.  That sounds like exactely the problem.  I have a cue list with 9 steps each of them a different color.  I also put the intensity at full.  I changed the parameter of all the steps to manual then the fader to intensity master.  The List itself seems to work by itself, but it seems to be also inhibiting those fixtures intensity as well.  For intstance if I run an intensity effect off of a submaster or another cue list, the fader of the color/intensity cue must be up for anything to happen.  On the console the intensity is listed in blue text as if the cue wants it to stay there

I have tried this now with three different types of fixtures VL2500's, Colorblast 12's, and Chauvet colorado's, all with the same result.  Anything I am doing wrong here?  

Thanks!

Anne,

Thanks for getting back to me.  That sounds like exactely the problem.  I have a cue list with 9 steps each of them a different color.  I also put the intensity at full.  I changed the parameter of all the steps to manual then the fader to intensity master.  The List itself seems to work by itself, but it seems to be also inhibiting those fixtures intensity as well.  For intstance if I run an intensity effect off of a submaster or another cue list, the fader of the color/intensity cue must be up for anything to happen.  On the console the intensity is listed in blue text as if the cue wants it to stay there

I have tried this now with three different types of fixtures VL2500's, Colorblast 12's, and Chauvet colorado's, all with the same result.  Anything I am doing wrong here?  

Thanks!