Mapping Faders

i change my faders depending on half or full stage (ex. fader one is sub one for full 41for half stage) this used to be under the setup desk area but is now gone wear did it go?

it's now in tab 36 (fader config). you can find more information in the Manual Supplement in the section for version 2.4.

of course the mapping keystrokes frommbefore still work: Sub 1 Load to map and Sub 1 Shift+Load to unmap. Load is the single button above the fader (sometimes labelled with the fader number or with the word Load or Master, or on the universal fader wings that don't have this button you use both buttons below the fader simultaneously.

it's now in tab 36 (fader config). you can find more information in the Manual Supplement in the section for version 2.4.

of course the mapping keystrokes frommbefore still work: Sub 1 Load to map and Sub 1 Shift+Load to unmap. Load is the single button above the fader (sometimes labelled with the fader number or with the word Load or Master, or on the universal fader wings that don't have this button you use both buttons below the fader simultaneously.