Eos Color Picker Missing Standard Gel Colors

Hi there!

Take a look in color library number 5 -- Rosco Roscolux.  I suspect you might be looking in library number 4 -- Rosco Other.  The Rosco 300's (365, 372, etc...) are in numeric order, not swatchbook order.

Hans

I am experiencing a similar issue.  I am running an ETC ION with the recently released upgrade.  I have several Wybron CXI color scrollers (patched as compound channels) and when I select the channel and go into the color picker (either in the gel picker in the moving light controls or the color picker as a tab) only about 20 colors appear. I recently (yesterday) updated the library for the scrollers and am out of options.  Any ideas what it could be???

Hi there,

With 1.9.5 software, there was a change in how the console handles dual scroller (Wybron CXI, Apollo MXR, etc...) color mixing.  In 1.9.5, we only expose the colors that the manufacturer (in this case, Wybron) says that the scroller can meet.  

The other change in CXI profiles is that we have the scroller 1 and scroller 2 channels set as 0-100% levels (matching the color guide in the manual), instead of frame (F1, F2, etc...) values.

Hans

Hi there,

With 1.9.5 software, there was a change in how the console handles dual scroller (Wybron CXI, Apollo MXR, etc...) color mixing.  In 1.9.5, we only expose the colors that the manufacturer (in this case, Wybron) says that the scroller can meet.  

The other change in CXI profiles is that we have the scroller 1 and scroller 2 channels set as 0-100% levels (matching the color guide in the manual), instead of frame (F1, F2, etc...) values.

Hans

Awesome...completely makes sense now...Thank you so much!