Help with Apollo MXR scrollers

Hi there.  First, you need to install 1.9.5.  We made substantial changes to handling dual mix scroller units, such as the MXR, in 1.9.5.    To control them, you can either set scroll and scroll 2 to the DMX values referenced in the Apollo documentation to mix, or you can use the color/gel picker.

Thanks much!

a

Hi there.  First, you need to install 1.9.5.  We made substantial changes to handling dual mix scroller units, such as the MXR, in 1.9.5.    To control them, you can either set scroll and scroll 2 to the DMX values referenced in the Apollo documentation to mix, or you can use the color/gel picker.

Thanks much!

a

Thank you Anne, will do. I'm quite excited to try out the VMS as well.

George, has this helpful tip been, well... helpful?

Hoping all is well-

Keith

Hi,

We updated to 1.9.6 but the MXR'rs are still not responding to colour picker/gel picker etc.

In patch is it the base MXR that we use under Apollo?

Thanks

Geoff

Hi

So we just changed the patch to 'MXR FAN' and now they work with colour picker and gel picker like they should.

I guess it matters?

Away we go !

Thanks

Geoff

If you loaded in a show file that was saved in a previous build, the old MXR profile would be loaded with the show file.  After loading the show you would need to update the fixture profile in the Fixture Editor.  Then the MXR would use the new profile.

It worked by changing it to MXR Fan because this patched it using the updated fixture profile.