1.9.6 Ocean Optics Sea Changer Color picker limit size

So I noticed on the 1.9.6 update that the outline for the limit of color mixing on Sea Changers has shunk considerably. It's kind of hard now to work to a certain color now. The Seachangers have a greater color range than the VL 1000's we also have and yet there limit box is now way smaller on the seachangers. It didn't effect the data in any way just the area you have to control that data. Anybody else having issues?

Other thing I noticed I updated the fixture library for my patched fixtures but SeaChanger's trying to set color by gel is off big time now. Some are as bad as what should be a pink is a orange amber.

[edited by: wheels00 at 12:21 PM (GMT -6) on Sat, Feb 12 2011] add

Anne Valentino over 14 years ago

Which version of the Sea Changers are you using?

Thanks!

anne
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
wheels00 over 14 years ago in reply to Anne Valentino

I'm using three 4ch EG, EG Wash, and EG 6ch
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Anne Valentino over 14 years ago in reply to wheels00

Thank you very much. We will look into the issue and report back!

a
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
ehuber over 14 years ago

we are seeing it to with the seachanger EG units. they can produce way more than wht the picker allows
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Richard over 14 years ago in reply to ehuber

At present the colour picker isn't able to properly handle CMYG fixtures. As previously mentioned here, we are looking at adding the CMYG colour model in a future update - though colour models are rather complex, so please be patient!

However, there is a mistake in the library that added gamut calibration data to the Sea Changer XG fixtures using the CMY flags alone - so Green's missing, along with all the other colours you can get by using the Green flag.

We now have a library update with the erroneous calibration data removed - if you'd like this, please get in touch with your local ETC support.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
33boardop over 9 years ago in reply to Richard

As we are planing to rent Sea Changer XG 4ch fixtures, I wanted to see what the v2.3.3 color library did with the green wheel. While most choices moved the green wheel, some did not. A few hear or there like Lee 068, some in blocks like Rosce E color, some that were frosts. Like Rosco 102. Strangely the White 102 'light tough frost' moved the yellow wheel to 49% !?
Any choice that didn't change the green wheel left it where it was, which made the end result unpredictable.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel