Hooking Up To WYSIWYG

Hi Gerry,

I'm no WYSIWYG expert unfortunately, but there are some good hints and tips in this wiki: http://community.etcconnect.com/wikis/products/knowledgebase-connecting-eos-ion-element-to-a-visualiser.aspx

I'd try checking all your settings against this and see where that takes you.

Graham

Hi Gerry,

In Options/Application Options go to the Additional Interfaces tab and make sure that ETC Net2 Version is set to V4 and allow edmx reception is selected. You will probably need to restart wyg at this point but then it usually works for me first time.

Malcolm