• Date
    BSmith
  • Date
  • Replies 3 replies
  • Subscribers 183 subscribers
  • Views 4306 views
  • Users 0 members are here

Channel Control

Howdy,

Could someone please let me know the command for 'homing' all parameteres of a given channel?  Like 'Go To Cue Out' for only chosen channels.

Also while we're at it, I would like to know how to send a channel to the recorded level it is in a different cue.  Like Ch. 10 @ cue 5.

Thanks,  Brent

Parents

  • HI Brent,

    to "home" a channels parameters you can use:

    ch [Home] [Enter]                  or:

    ch [Focus] [Home] [Enter]      to home focus only.

    You might still see Pal./Preset values (if "at home" and recorded with the [Record] command, to get rid of those you could simply make them absolute with softkey {Make Absolue} ...)   

    To "recall" a channel from a specified cue:

    ch [Recall from] [Cue] no     

    10 [Recall from] [Cue] 5                  or, if you want to "recall" the level/intensity only:

    10 [Intensity] [Recall from] [Cue] 5

     

    Hope that helps,

    Cheers, Markus.

Reply

  • HI Brent,

    to "home" a channels parameters you can use:

    ch [Home] [Enter]                  or:

    ch [Focus] [Home] [Enter]      to home focus only.

    You might still see Pal./Preset values (if "at home" and recorded with the [Record] command, to get rid of those you could simply make them absolute with softkey {Make Absolue} ...)   

    To "recall" a channel from a specified cue:

    ch [Recall from] [Cue] no     

    10 [Recall from] [Cue] 5                  or, if you want to "recall" the level/intensity only:

    10 [Intensity] [Recall from] [Cue] 5

     

    Hope that helps,

    Cheers, Markus.

Children
Related

www.etcconnect.com