Values returning

Question

I have a question that im sure Im overlooking the answer. In cue 2 I have many channels with 0 values in green. I want to get rid of 0 values so in blind I select channel and hit @ enter. Ex 262@enter . As soon as I do that insted of getting rid of the zero it go to the value its stored at in the previous cue. It is magenta so I understand its tracking. I have blocked the cue but it keeps happening. Im sure its user error but Just cant get it. 
 
 Thanks 
 Chris

Andrew Riter · Accepted Answer

What do you want the value to be in Cue 2? If it has levels in Cue 1, and you want the light out/off in Cue 2, the board requires the 0% since that is the command. If you don't have an out/off command in Cue 2, then it will import the last level (track), or you must set a new intensity/value higher or lower than Cue 1. 
 It's in Cue 3 where you would use your method to get rid of unwanted '0's since the channel value isn't changing between Cues 2 and 3. 
 Not sure what you're trying to do . . . 
 Andrew Riter