ION invert

This is really more of a request. Is it possible to include the pan and tilt invert commands on the LCD when the encoders are pushed down or was that something intentionally left out with Home, Flip and Trckball on/off the only choices?

Parents

0 luke.delwiche over 13 years ago

Hi Jeff-

This wouldn't really make much sense, unfortunately. The Pan/Tilt invert functions are really something that you use when first patching - if you use them afterwords, all of your existing show data will be changed. That would be pretty dangerous to have as a function in Live!

-luke-
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Jeff Toussieng over 13 years ago in reply to luke.delwiche

Actually when moving from one venue to another doing lighting for one band then another it is not always possible to hang, set, etc. movers in the exact same configuration. I use focus palettes in all my cues, which really don't change from one venue to another or one band to another. What I do is when I get to a venue that requires a different set up and requires the pan/tilt or both to invert, then I just edit my focus palettes. That wouldn't affect any cues would it?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Jeff Toussieng over 13 years ago in reply to luke.delwiche

Actually when moving from one venue to another doing lighting for one band then another it is not always possible to hang, set, etc. movers in the exact same configuration. I use focus palettes in all my cues, which really don't change from one venue to another or one band to another. What I do is when I get to a venue that requires a different set up and requires the pan/tilt or both to invert, then I just edit my focus palettes. That wouldn't affect any cues would it?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data