EOS and MIDI

There is some information on our wiki page on doing this.  In short, you will need a Net3 Show Control gateway in the system, and it's MIDI Out group ID must match that of the Eos's MIDI TX ID in Setup -> Show Settings -> Show Control.  MSC Transmit must also be enabled in the same screen.

Information on Show Control capabilities of the console family can be found here: http://community.etcconnect.com/wikis/products/eos-family-show-control-capabilities.aspx

Eos will only transmit MSC messages for what it is currently doing.  A list of these, as well as a more in-depth explanation of Eos and MSC, can be found here: http://community.etcconnect.com/wikis/products/understanding-the-msc-commands-eos-family-receives-transmits.aspx. 

There is some information on our wiki page on doing this.  In short, you will need a Net3 Show Control gateway in the system, and it's MIDI Out group ID must match that of the Eos's MIDI TX ID in Setup -> Show Settings -> Show Control.  MSC Transmit must also be enabled in the same screen.

Information on Show Control capabilities of the console family can be found here: http://community.etcconnect.com/wikis/products/eos-family-show-control-capabilities.aspx

Eos will only transmit MSC messages for what it is currently doing.  A list of these, as well as a more in-depth explanation of Eos and MSC, can be found here: http://community.etcconnect.com/wikis/products/understanding-the-msc-commands-eos-family-receives-transmits.aspx.