• State Not Answered
  • Date
    lbarnes2
  • Date
  • Replies 7 replies
  • Subscribers 187 subscribers
  • Views 7483 views
  • Users 0 members are here

Eos family client network?

Hi,

I'm running an ION in the control room, and want to get the detailed cue list display (like the one I see on my screen) down to the stage manager's position for a show next month. Could this possibly be done by connecting laptop running the eos family offline software in client mode? I've had a quick play and couldn't get it to work - likely due to the settings in network. (I hate networking...) I'm successfully running iRFR off the network, but can't get my mac to connect.

Thanks in advance!

Luke

Parents
  • 0

    Yes, this should work-

    - The Mac needs to have the same version of Eos Offline/Client as the Ion
    - The Mac should be on the same switch as the Ion, not on the "far side" of a router (which the iRFR device might be)
    - The Mac should have a 10.101/16 IP address, such as 10.101.1.101, subnet mask 255.255.0.0

    If you have troubles, you might want to give support a call, or post here - as you've spotted, networking can get complicated!

    -luke- 

Reply
  • 0

    Yes, this should work-

    - The Mac needs to have the same version of Eos Offline/Client as the Ion
    - The Mac should be on the same switch as the Ion, not on the "far side" of a router (which the iRFR device might be)
    - The Mac should have a 10.101/16 IP address, such as 10.101.1.101, subnet mask 255.255.0.0

    If you have troubles, you might want to give support a call, or post here - as you've spotted, networking can get complicated!

    -luke- 

Children
No Data
Related

www.etcconnect.com