• State Not Answered
  • Date
    melkin
  • Date
  • Replies 3 replies
  • Subscribers 184 subscribers
  • Views 2120 views
  • Users 0 members are here

ion query

Hey Guys,

We have recently added a load of Chauvet RGBW Birdies to our rig. I now have a problem where some of my mover moves that I have recorded on subs etc, if I want to alter them and then re-record the sub it will not actually record the new state and when I put the sub up it will still be the old state. We have 12 movers and 16 scrollers and 20 RGBW birdies along with our generics fresnels, profiles etc. Everything is all on universe 1 and we have a DMX splitter, to split the DMX to all the fixtures. the RGBW birdies are on their own line out of the splitter and not connected directly to any other fixture.  

Everything was fine and I never had any problems before adding these birdies. However the one thing that I do have on every single DMX channel (scrollers, movers & rgb birdies) on the display on the screen is the letter N, which I dont remember being there before.

Just wandered if anybody had experienced this before or even anyone had a clue.

Any advice would be greatfully recieved 

Parents
  • 0

    The 'N' you're seeing on your channel display means that you have Nulled channel/attribute information. This would explain why you are not getting the results with Record or Update that you are expecting.

    This is most likely to be an Active Filter. If you click on the Filters Button to the left side of the CIA and then Clear Filters, this should remove the Null across the channels.

    Then all should be back to normal.

    Hope this fixes it.

     

    Warren.

Reply
  • 0

    The 'N' you're seeing on your channel display means that you have Nulled channel/attribute information. This would explain why you are not getting the results with Record or Update that you are expecting.

    This is most likely to be an Active Filter. If you click on the Filters Button to the left side of the CIA and then Clear Filters, this should remove the Null across the channels.

    Then all should be back to normal.

    Hope this fixes it.

     

    Warren.

Children
Related

www.etcconnect.com