• Date
    Heather Richards
  • Date
  • Replies 3 replies
  • Subscribers 186 subscribers
  • Views 3973 views
  • Users 0 members are here

Moving marks

Hello all!  I am happily cueing a show with automark on, but expect that we'll be needing to move some marks.  I have not done this before.  Let's say channel 1 comes up in cue 5 and marks in cue 4, but I want it to mark in cue 3.  Do I go into cue 5, use a softkey to turn automark off, select channel one, and type mark cue 3 enter?  And am I hem good to turn automark back on and carry on?  Will cue 5 then have an R and cue 3 an M?  Thanks for any confirmations / help!

Heather

Parents

  • Hi Heather,

     

    If you want this flexibility you will need to turn off automark completely and use manual Referenced Marking. Automark will always mark in the cue immediately before the intensity comes up. If this is just a one off you might want to just disable automark for cue 5, then copy all NiPs of the relevant fixtures into Cue 3 and let them track forward. Remember that these are now hard values in Cue 3 and you'll need to update them if you change the position in Cue 5 later.

    If you find this happening a lot I'd go with Referenced Marks as you will have more control over where your marks are.

     

    Graham

Reply

  • Hi Heather,

     

    If you want this flexibility you will need to turn off automark completely and use manual Referenced Marking. Automark will always mark in the cue immediately before the intensity comes up. If this is just a one off you might want to just disable automark for cue 5, then copy all NiPs of the relevant fixtures into Cue 3 and let them track forward. Remember that these are now hard values in Cue 3 and you'll need to update them if you change the position in Cue 5 later.

    If you find this happening a lot I'd go with Referenced Marks as you will have more control over where your marks are.

     

    Graham

Children
No Data
Related

www.etcconnect.com