Fading pallettes in LIVE.

From the command line, you can use the syntax {chans} [Sneak] {CP} [Enter]. This also works with the direct selects, in which case there is no need for [Enter].

For example [3][1] [Thru] [4][0] [Sneak] {DS-Red}

Hope that helps-

-luke-

what if i want to change color and position in different times on same execute? 

the command line only allows for manual control of one attribute at a time.

It sounds like you're using the desk for busking type scenarios. The command line isn't really intended for this type of use, rather for programming purposes. In this case I think you'd be better off recording a series of subs and using these to move between palettes of varying types.

There are a whole host of options for subs which might be useful to you such as I-Master and timings etc.

Cheers

Dan

It sounds like you're using the desk for busking type scenarios. The command line isn't really intended for this type of use, rather for programming purposes. In this case I think you'd be better off recording a series of subs and using these to move between palettes of varying types.

There are a whole host of options for subs which might be useful to you such as I-Master and timings etc.

Cheers

Dan