Ion Fader Wing LEDs flashing

Hi all,

Today installed a 2x10 Fader Wing onto my ION console running 1.9.6 (I believe). I have two subs programmed (1 = house lights, 2 = works). And I have those two subs assigned to two faders on the wing for manual control of those channels. But for some reason, when those sliders (all sliders in fact) are down, the LEDs on those two sliders flash.

Any idea why this might be happening? Normally this has only happened if there were multiple faders with the same items assigned (for instance two sliders both with Sub 1 assigned) and 1 slider is up but the other is down.

I would love to solve this problem as the console sits mid-house on a control desk and will probably become very distracting to the audience behind.

Thanks for any thoughts or comments to help this.

Cheers,

Darren Hales
Technical Director - Lord Byng Fine-Arts Academy
Vancouver, BC

0 Richard over 13 years ago

The LEDs flash if the Sub is at a different level to the physical Fader.

Subs can be controlled by Macros, the command line, clients and on-screen 'virtual' faders, so the chances are something else moved those subs.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 grahamparker over 13 years ago in reply to Richard

The Syntax [Sub] [1] [Thru] [home] [Enter] should take all Subs to their home position (zero for Additive Subs, Full for Inhibits). This should clear the flashing LED's if your physical faders are down.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel