• Date
    ollyboustead
  • Date
  • Replies 4 replies
  • Subscribers 186 subscribers
  • Views 8895 views
  • Users 0 members are here

Import a Cue list from CSV

Hi all, 

Heres a question..... Is it possible to take a cue list from the lighting designer and convert it to CSV and then import the cue list into the console, I only what cue numbers times and text of the cues not any lamp levels etc.

many thanks 

olly b 

Parents

  • Maybe keep it as an USITT ASCII Cue file, then set the channel count to 1 so it won't import the level data except for ch 1, which is an easy edit

    Never tried it though.

    EDIT: Just tried it off-line.  Didn't work as the import add's all the channels in the incoming file.

    Note that if the incoming file is ASCII,, you can clear the patch then work in Patched Channels and not see the imported levels.  Not sure that's what you're after.

     



    [edited by: Steve Bailey at 1:35 PM (GMT -6) on Mon, May 7 2012]
Reply

  • Maybe keep it as an USITT ASCII Cue file, then set the channel count to 1 so it won't import the level data except for ch 1, which is an easy edit

    Never tried it though.

    EDIT: Just tried it off-line.  Didn't work as the import add's all the channels in the incoming file.

    Note that if the incoming file is ASCII,, you can clear the patch then work in Patched Channels and not see the imported levels.  Not sure that's what you're after.

     



    [edited by: Steve Bailey at 1:35 PM (GMT -6) on Mon, May 7 2012]
Children
No Data
Related

www.etcconnect.com