Hitting [Next] or [Last] will scroll through the cues one at a time, particularly useful in Blind. Alternatively you can select the PSD either by clicking it with your mouse or by hitting [Tab] + # (the number of the PSD display) or cycle through the displays by hitting [Tab] [Tab] etc. You'll know when it's selected because you'll then have a gold border. Then you can use [Page Up] or [Page Down] as you do on the Channel Display.
So I see what using two EOS family consoles can do - cause confusion. Ehhh ooops this was meant as Element, not ION. Yikes. I can't seem to get anything to scroll when in the psd.
So I see what using two EOS family consoles can do - cause confusion. Ehhh ooops this was meant as Element, not ION. Yikes. I can't seem to get anything to scroll when in the psd.
As Element doesn't have Tabs it is of course not possible to highlight the PSD, which means page up and down act on the channel display in Live. Your best option is to use next/last. Make sure you don't have a channel on the command line though, otherwise you'll end up selecting the next/last channel :-)
If you want to look at a specific cue you can always type [Cue] [x] [Enter]
[edited by: grahamparker at 3:08 AM (GMT -6) on Mon, May 14 2012]
Thanks. It does make a difference asking for the correct console :-)
Next/last, i'll give that a try today. I think I did page up/down and arrows. Sometimes I want to scroll to see what cues are what rather than going to a particular cue.
