• State Suggested Answer
  • Date
    elementmog
  • Date
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 26 subscribers
  • Views 2522 views
  • Users 0 members are here

Martin Rush MH7 fixture profile

 I'm using a couple of Martin Rush MH7 hybrid fixtures and I've noticed that the fixed gobo wheel positions do not appear to match the layout in the fixture library. If, for example, I select gobo 8 (four lines in a square pattern) from the ML controls tab I actually get one of the iris holes on the wheel. The issue is consistent across both fixtures so I don't think it's a rouge unit. It's not really causing a huge problem, more a minor irritation. 

It may already have been fixed in 2.7, but I haven't had the chance to upgrade yet to check.

Parents
  • 0

    Hi all,

    Testing the Martin Rush MH7 profile in current software (v2.8.3 with fixture library v2.8.3 build 12), I was unable to spot a difference between the Eos profile and the profile specified in the attached manual. I looks like the ranges for DMX ch 5 (Gobo Select 1) and ch 8 (Gobo Select 2) match the manufacturer's DMX chart. In the Attributes tab of Patch, please verify that the profile you are using contains Gobo Select: Martin Gobo Wheel 58 and Gobo Select 2: Martin Gobo Wheel 53. 

    If upgrading to this version does not resolve the issue, we will want to compare the DMX values the console is sending out for those parameters with the expected results in the manual vs the results the fixture is demonstrating live. 

    Best,

    Therese

    . 1665.UM_RUSHMH7_EN_D_original.pdf

Reply
  • 0

    Hi all,

    Testing the Martin Rush MH7 profile in current software (v2.8.3 with fixture library v2.8.3 build 12), I was unable to spot a difference between the Eos profile and the profile specified in the attached manual. I looks like the ranges for DMX ch 5 (Gobo Select 1) and ch 8 (Gobo Select 2) match the manufacturer's DMX chart. In the Attributes tab of Patch, please verify that the profile you are using contains Gobo Select: Martin Gobo Wheel 58 and Gobo Select 2: Martin Gobo Wheel 53. 

    If upgrading to this version does not resolve the issue, we will want to compare the DMX values the console is sending out for those parameters with the expected results in the manual vs the results the fixture is demonstrating live. 

    Best,

    Therese

    . 1665.UM_RUSHMH7_EN_D_original.pdf

Children
No Data
Related

www.etcconnect.com