Fixture request

Hi Graham,

Thank you for your profile submission. If you need this profile sooner than 3 weeks please let me know!

Best,

Therese

Hi if I could get it sooner that would be great but as I need it in 2 days I will have to bodge a solution together.

Thanks

Gray

it should be quite doable to create the profile yourself. i would start with a generic IRGBW led (8bit) from the library. go to the fixture editor and have a look at the DMX column. there you can enter for the Intens,R,G,B,W parameters addresses 4,5,6,7,8. then insert parameters for addresses 1, 2 and 3.. if you will not use them anyway, you can just choose any parameter name and don't do anything else. if you want to use them you should fill out the ranges.

it should be quite doable to create the profile yourself. i would start with a generic IRGBW led (8bit) from the library. go to the fixture editor and have a look at the DMX column. there you can enter for the Intens,R,G,B,W parameters addresses 4,5,6,7,8. then insert parameters for addresses 1, 2 and 3.. if you will not use them anyway, you can just choose any parameter name and don't do anything else. if you want to use them you should fill out the ranges.