ETC library for LEDko FS6 HD, please

Thanks for the quick reply. Yes there are profiles for this fixture but they see the Ledko as a RGBAW spot so leaving out the lime if you pick a color. Not very accurate. I got the information from Coemar that they provided (through Carallon) new profiles (and that these will be part of the next fixture profile release). Could I get these prior to the release, please?

Thanks,

Bas

If Coemar has already requested the update, I can ask that it get pushed up before the next release, but there is no guarantee that it will happen due to the team's current workload. If you need a profile before the next release, I would suggest editing the existing one or creating a custom one in the Eos fixture editor. The following portion of the Eos manual covers the fixture editor:

http://www.etcconnect.com/webdocs/Controls/EosFamilyOnlineHelp/en-us/Default.htm#Patch/Fixture_Editor.htm

If Coemar has already requested the update, I can ask that it get pushed up before the next release, but there is no guarantee that it will happen due to the team's current workload. If you need a profile before the next release, I would suggest editing the existing one or creating a custom one in the Eos fixture editor. The following portion of the Eos manual covers the fixture editor:

http://www.etcconnect.com/webdocs/Controls/EosFamilyOnlineHelp/en-us/Default.htm#Patch/Fixture_Editor.htm

Yes did build my own already before, but the colors in ETC are not capable (yet) to drive RGBWLA leds to create the color I picked. All sorts of combinations are possible, but not this specific one. So yes I get all the faders needed and they control the right leds but when it comes to use the color picker it fails. If you could ask for a pre release ,that would help a lot. Although I'm aware that this is not a very exciting job to do compared to the upcoming 3d (great work!!)

I think that even with an official profile you may still have that issue unless the manufacturer can provide calibration data- which takes some time.  An explanation can be found here:  https://support.etcconnect.com/ETC/Consoles/Eos_Family/Software_and_Programming/Why_do_some_color_values_on_my_LED_fixtures_change_when_I_use_the_color_picker%2C_but_others_don't%3F

The good news is that the calibration data is provided (by Carallon) and probably waiting on a ETC server to be implemented in the next fixture library update along with the exciting new 3d software. This might take longer then expected and therefore it would be super if I could get it prior to that release. 

(sorry for unintentional voting, clicked too close). I check with our team and they have not received the information for Carallon at this time. Carallon's next schedule release to us is next month, and we have reached out to see if that will be included. Unfortunately we cannot add it until we receive it, so it will be at least March before this is added.

Thanks for checking! Odd that it's not there though. Luckily it's March in a couple of days. Frustrating that it has 31 days. Meanwhile I will check why the info I got from Coemar seams to be wrong.