The Pan & Tilt range for the GLP Impression X4S is incorrect in the built-in profile. ( Eos v3.0.2 / Fixture Library v3.0.1.2 )
According to the manual (and confirmed in practice) correct ranges are:
Pan: -315 > 315 (630º total)
Tilt: -110 > 110 (220º total)
The incorrect ranges in the built-in profile are:
Pan: -330 > 330 (660º total)
Tilt: -150 > 150 (300º total)
^^^These ranges are correct for the larger Impression X4 fixture, not for the smaller X4S.
I've been using X4S fixtures in a long-running show for years, but I never noticed this flaw until I upgraded to Eos v3.0 and starting playing with Augment3d. Obviously the focus positions in Augment3d don't match reality unless I correct the ranges in the Fixture Editor.
However, if I were to correct the ranges in the profile in my show, it would break all of my existing Focus Palettes, and require a considerable amount of reprogramming. Is there a way to scale those parameters in Augment3d to trick it into showing me accurate focus positions? (I will ask this in the Augment3d forum as well).
Thanks.
Ethan
Eos Ti v3.0.2 / Fixture Library v3.0.1.2
