Correction for clay Paky Mini-B fixture profile

I've found a further issue for this profile...

In the Multi-Cell versions the cells are not flagged as "Mastered" so the colours are not auto marking

(and in version 3.1.1.5 of the library the Physical data is missing the Z offset)

Hello, 

I am told this is intentional, since the master part of hte fixture has a real intensity parameter that means the fixture's master cell will master the intensity of the individual cells.

When the cells are not flagged as "Mastered" marking does not occur for the colours in the cells so on fade up a colour change occurs.  By setting the Mastered flag marking DOES happen and observed behaviour is as I would expect, Also when Mastered, the cells do not show in "Active" flexi mode when the Master intensity is zero - again this is desirable.

intensity of a cell's output is indeed the "product" of the master intensity and the cell intensity so when master is at 80% and cell is at 50% output is effectively 40% - as I expect.

When the cells are not flagged as "Mastered" marking does not occur for the colours in the cells so on fade up a colour change occurs.  By setting the Mastered flag marking DOES happen and observed behaviour is as I would expect, Also when Mastered, the cells do not show in "Active" flexi mode when the Master intensity is zero - again this is desirable.

intensity of a cell's output is indeed the "product" of the master intensity and the cell intensity so when master is at 80% and cell is at 50% output is effectively 40% - as I expect.