Change request: Cameo Auro Beam 200 DC

Question

Hey there, 
 I noticed the Pan range from the Cameo Auro Beam 200 in the fixture library is only -100 to 100 and that is weird. Pan is at least 540&deg; so -270 to 270 would be great. The thing is... In Live you do not notice it directly. Only in ML Control. But in Augment3d it is weird... I know that there is also the possibility of pan 630&deg; so there could be a conflict. But I think having 540&deg; Rotation in Augment3d instead of 200&deg; Rotation when in reality working with 630&deg; is the smallest problem. 
 Manual: https://www.cameolight.com/en/downloads/file/id/1803626474 
 Mode: 13 channel (but I guess the other modes are also like this) 
 Also is there a way to integrated the default gobos? I know that it has to be given by the manual or manufacturer. And that I can't just say which ones are matching. So they can be found there: https://cdn-shop.adamhall.com/ORIGINAL/media/MARKEN/CAMEO/CLAB200DC/CLAB200DC_8.jpg 
 EOS Version is 3.1.x 
 Thanks a lot 
 Lars

justin williams · Answer

Hello, 
 the -100 to 100 range you see is a percentage range, not a degrees range. this is common practice in our profiles. If you would prefer to view them as a degree number instead, you will need to alter the profile slightly. Please contact ETC Technical Support at 800-688-4116 for more info on how to do this.