Hi all,
the tilt range of Clay Paky A.leda Wash K10 is wrong in all modes:
In the eos fixture profiles (eos 3.1.0 Build 282, fixture library version 3.1.0.32) the tilt range is set from -226° to 226° and should be -126° to 126°.
Also the positions of the pixels in single pixel modes are wrong in the Augment3D model. The correct arrangement is indicated in the manual.
The manual can be found here: https://www.claypaky.it/media/documents/A.leda_Manual_Rev.PRE_(09.12)_EN.pdf
Best regards
Johannes Felber
