JB Lighting P12 Profile WW, P12 Spot WW and P12 Wash WW

Request Submitted.

Please note that the JB Lighting fixtures range is not fully complete and clear in the current ETC Eos fixture library (v 3.1.0).

These fixtures are becoming more widely used in theatres across Germany, The Netherlands and the rest of Europe. Most of these fixtures can be powered by three different types of led light engine.

The full range of fixtures that should be included in the fixture library is:

JB Lighting P9 Beamspot HP (High Power)

Note: this fixture only has one led light engine, HP (High Power)

Note: this fixture profile was requested by me in a previous forum post

JB Lighting P12 Spot HP (High Power)

JB Lighting P12 Spot HC (High CRI)

JB Lighting P12 Spot WW (Warm White)

JB Lighting P12 Profile HP (High Power)

JB Lighting P12 Profile HC (High CRI)

Note: fixture above is already present in fixture library, but without the proper led light engine addition to it's name

JB Lighting P12 Profile WW (Warm White)

JB Lighting P12 Wash HP (High Power)

JB Lighting P12 Wash HC (High CRI)

JB Lighting P12 Wash WW (Warm White)

Note: fixture above is already present in fixture library, but without the proper led light engine addition to it's name

Note: fixture is missing color calibration data but is using the same led light engines and CMY/CTO color mixing flags as P12 Profile, which is accurately calibrated.

Manuals can be found here:

P9 Beamspot: https://www.jb-lighting.de/download/Handbuch/P9_manual.pdf

P12 Spot and Profile: https://www.jb-lighting.de/download/Handbuch/P12_manual.pdf

P12 Wash: https://www.jb-lighting.de/download/Handbuch/P12_Wash_Manual_EN.pdf

Thanks so much in advance for making this work!

Thanks, Mike.  All of these have been submitted.

MikeEvers and Peter Schough 
These are slated to be in the next library release EOS_FixtureLib_3.1.1.10 when it gets posted.

www.etcconnect.com/.../Libraries.aspx

1. Added JB Lighting - P12 Profile WW, Spot HC, Spot HP, Spot WW, Wash HC, Wash HP, & Wash WW

Thanks Chris! Will check these profiles when working with these fixtures again.