Martin Jem ZR24 7 Hazer

Question

Hi, Please can we have a fixture profile crated for the Martin Jem ZR24 7 Hazer, Please can the Haze output be set as a value that can be se by typing a value in or putting it on a sub-master as this is not possible with the current profile. 
 I am using 3.1.1 
 Thank you 
 James 
 
 UM_Zr24-7_EN_B.pdf

Matt Pumplin · Answer

Hello jamesrowe , I see there is a Martin ZR 24/7 in the library for v3.1.0 / v3.1.1. It appears to match the manual that you linked. 
 I was readily able to type eg "Chan 1 {Blower} 25" or "Chan 1 {Haze} 57" Those values become the DMX level 0-255 that is sent to the fixture. 
 But I see that "Haze 57" doesn't mean "57%" - is that what you're thinking of? 
 As you can see in the manual, it stats the Fog [Haze] values are 
 "20 - 220 proportional output level control Implemented in 20 discrete steps" - 
 so on the console, they have a range with 20 "chunks" that you can choose from and scroll within. 
 
 If you prefer a simple linear layout where you want "57%" to output DMX 145, you can make a copy of the onboard profile and delete all the various modes. Then you have control over the fixture, but need to be aware of the end ranges lixke "Prime function" on channel 1. Or, you could modify the ranges that are there to fit your needs.