• State Verified Answer
  • Date
    Denis Twomey
  • Date
  • Replies 22 replies
  • Answers 1 answer
  • Subscribers 26 subscribers
  • Views 3334 views
  • Users 0 members are here

fixture profile for Lightmaxx Vega DOT60 fixture

Hi

I am running EOS version 3.1.5 Build 8.

I would like a fixture profile for the following fixture please.

Lightmaxx Vega DOT 60

16 channel mode

I can't get access to the manual, but I was given this chart by someone who has it working on an Avo console. I tried creating a new profile myself, but cannot get it to work properly. I hope you can help.

Parents
  • 0

    Thank you for the file.
    There are a lot of Virtual parameters.
    Make them the corresponding DMX Addresses.

    And as Homevalues you can set:
    - (all) Speed-parameter at 255 (Ch3&6)
    - (all) Motor-Parameters at 0 (Ch2&5)

    And consistensy wise you could make "Color Select" into a "Color Mix". Than your "Color Mix Speed" is read as related to it.

    I think that should do the Trick for the moment.
    Looking good so far.

    Congratulations  

Reply
  • 0

    Thank you for the file.
    There are a lot of Virtual parameters.
    Make them the corresponding DMX Addresses.

    And as Homevalues you can set:
    - (all) Speed-parameter at 255 (Ch3&6)
    - (all) Motor-Parameters at 0 (Ch2&5)

    And consistensy wise you could make "Color Select" into a "Color Mix". Than your "Color Mix Speed" is read as related to it.

    I think that should do the Trick for the moment.
    Looking good so far.

    Congratulations  

Children
Related

www.etcconnect.com