Submitted

Cue Part Label Copy To/Move To

The following different syntaxes don't do anything or don't do what we intend them to do

[Cue] [1] [Part] [1] [Copy To] [Cue] [2] [Part] [1] {Labels Only} [Enter] - does not copy the Part 1 label from Cue 1 to Cue 2 Part 1, instead copies the Cue 1 label to Cue 2

[Cue] [1] [Part] [1] [Copy To] [Cue] [1] [Part] [2] {Labels Only} [Enter] - does not copy the Part 1 label to Part 2 in Cue 1

[Cue] [1] [Part] [1] [Copy To] [Copy To] [Cue] [1] {Labels Only} [Enter] - does not move the Part 1 label to the label for Cue 1

stevendjlighting
Parents

  • I am running 3.2.10 build 36 and can recreate that this does not work.  As it's a very specific scenario it's likely just not coded or a bug.  But that would/should be the correct syntax.

    The label does copy/move to the correct part if you do it without {Labels Only} but then of course you are overwriting the data.

Comment

  • I am running 3.2.10 build 36 and can recreate that this does not work.  As it's a very specific scenario it's likely just not coded or a bug.  But that would/should be the correct syntax.

    The label does copy/move to the correct part if you do it without {Labels Only} but then of course you are overwriting the data.

Children
No Data

www.etcconnect.com