It would be really great if we could toggle (or permanently change) the patch display to display the first slot/address of a DMX fixture as its address in patch. Currently if a fixture begins its profiles with cells and has global control channels at the end, we see those addresses first. It forces a programmer to scan through the fixture to find the lowest address. This is a bigger problem when exporting patches with multicells as csv's, because the channel column shows up blank (for a fixture with no global values) or with a higher address than the true fixture's starting address (for fixtures that do have global addresses). Lightwright can untangle it but it's a pain for quick exports, especially on shows with many multicell fixtures.
