Discrete Timing in Eos

In Express world - you have the following time options available for a cue - Up and Down. If you want to do complicated timing on a per channel basis, you have to use cue parts or follow cues.

In Eos world - every channel, and every parameter of every channel, can have its own time and delay. Your basic cue transition timing is still there (Up and Down) but you now have cue level control of Color, Focus and Beam times (as shown in the respective columns in the cue list).

Discrete timing is using the individual channel or parameter timing functions to override the cue level timing.

Ueliriegg's post explains how to apply the discrete timing to channels and the pros and cons of using parts vs. discrete timing.

In addition you can also apply the discrete timing to parameters:

• Chan 1 Color Delay 5 Time 2 Enter

The discrete timing applied in Live won't be stored in the cues until you do an Update or Record command.

To see any discrete timing that is already applied to your channels, hold down the [Time] button by the level wheel, not the [Time] key at the bottom of the keypad.

You can check out the videos for Chapter 12 at the link below for more info or search in the manual (tab 100) on the console.

https://www.etcconnect.com/Support/Tutorials/Eos-Family-Videos/Level-2-Enhanced.aspx

-Todd

In Express world - you have the following time options available for a cue - Up and Down. If you want to do complicated timing on a per channel basis, you have to use cue parts or follow cues.

In Eos world - every channel, and every parameter of every channel, can have its own time and delay. Your basic cue transition timing is still there (Up and Down) but you now have cue level control of Color, Focus and Beam times (as shown in the respective columns in the cue list).

Discrete timing is using the individual channel or parameter timing functions to override the cue level timing.

Ueliriegg's post explains how to apply the discrete timing to channels and the pros and cons of using parts vs. discrete timing.

In addition you can also apply the discrete timing to parameters:

• Chan 1 Color Delay 5 Time 2 Enter

The discrete timing applied in Live won't be stored in the cues until you do an Update or Record command.

To see any discrete timing that is already applied to your channels, hold down the [Time] button by the level wheel, not the [Time] key at the bottom of the keypad.

You can check out the videos for Chapter 12 at the link below for more info or search in the manual (tab 100) on the console.

https://www.etcconnect.com/Support/Tutorials/Eos-Family-Videos/Level-2-Enhanced.aspx

-Todd