• Date
    Golden
  • Date
  • Replies 3 replies
  • Subscribers 67 subscribers
  • Views 4927 views
  • Users 0 members are here

Link options on express boards

Hi there. Hoping someone can help. I am using conventional lights on Universe 1 and moving lights on Universe 2. I had made a bunch of cues on the conventional lights before the rental of the moving lights and I don;t want to lose those. I now have my conventional cues (ie. 1,2,3 etc.) and I have my moving light cues (ie. 200,201,202 etc.) and I want to incorporate my moving light cues into the conventional cues. I have used LINK, and that works great, BUT after the link is done, I want the cues to go back to the original number (ie. I link CUE 4 with CUE 200 and press the A/B fader go button....after cue 200 is played, the next cue to run would be 201, however, I want it to be CUE 5.

Any solutions for this, so that I don;t have to manually type the cues each time I link??

Thanks. Golden

Parents Reply Children
  • in reply to Golden

    Group only captures a static look (from a cue in this instance).  If a cue has channels moving and you record to Group, the record captures at the moment of the record process, whatever value the channels may be at.  Thus a running Subroutine will get "something" captured.

    Since the Subroutines are merely other cues that are being referenced by the operational cue (essentially as Effects steps) I would re-record the ML cues to the merged static cues, then re-assign/record the "new" merged cue with the existing Subroutines. 

    Never done this though

    SB

     

Related

www.etcconnect.com