Is there a way to make blank cues that have no information in them other than using "cue only" for the whole list. I tried deselecting the Forward soft key when recording and achieved nothing as it didn't prevent data from the previous cue from tracking forwards to into the blank cue. I'm trying to build a cuelist with onstage looks that require multiple sequential states and want the blank cues between sets of cues in the list so I can jump between the different sets of onstage looks with the GoTo key.
Can you not use a blank cue, and just jump straight to the look cue? If you're just going to the blank cue, then pressing Go, you could cut out that step all together. If you must have a blank cue you can record the 'blank cue' with a dummy fixture, then put a large delay on it (1hr+), so it doesn't change values in time. Then press go to continue to your look cue.
Can you not use a blank cue, and just jump straight to the look cue? If you're just going to the blank cue, then pressing Go, you could cut out that step all together. If you must have a blank cue you can record the 'blank cue' with a dummy fixture, then put a large delay on it (1hr+), so it doesn't change values in time. Then press go to continue to your look cue.
