In the JB-Lighting P9 beam spot fixtures the CTO function does not work in combination with the gobo wheels. This is a feature according to JB-Lighting: the CTB filter is automaticly activated when a gobo is applied to compensate the colorshift made by the gobo. There is a fuction in the dmx chart to turn this feature of: set the colorwheel to a dmx value of 1.
How do i set this up in the fixture builder so that i can turn it on and off?
P9_DMX_Protocol.pdf (jb-lighting.de) (please look at the German version of the dmx chart, the English one is not correct, JB-Lighting already is aware of this problem)
