Hi, I have to work with some Robe Robin 800 and I want to control the different Cells. In mode 1 there are 3 different types 'beam, cell and motion'. What I have to do to control the different cells?
When you use the Robin 800, you must patch the different fixtureparts in the following order and user numbers. 1 - motion 1.1 - cell 1.2 - cell 1.3 - cell 1.4 - beam
After that you can control the cells with "dot + Next"... I recommend the mode 5. In this mode you dont need the beam fixturepart.....
