Color Temperature in the Color system

I personally have avoided upgrading to v4 as not having simple direct access to CTO/CTB channels is too much of a jump currently.

Appreciate the software has to move forwards but having the option or ability to control individual CTO/CTB without having to use tint would be very helpful to me.

Thank you 

You have direct control on the CTO and CTB parameters (physical cto/ctb wheel in the fixture). The CTO and CTB parameters are not calculated in the colorpicker….. Hope this makes sense.

If the DMX chart specifies a percentage the modeling team wouldn't know the temperature. 

In version 4 the CTO, CTB and Minus Green are separate from the coloring system and i think they should be.
If you make a pretty color that looks nice to the naked eye but no to the camera you can just add in some CTO or CTB without changing the color.

My question was more about Colortemperature values on the encoder.
Now the CTO channel is set to
DMX: 0 > 65535
Function: CTO
Feature: Variable
Value: 0-100%

For example the Ayrton Veloce is calibrated om 6500K white LED source. It has a CTO wheel which goes to 2700K.
Why isn't it:
DMX: 0 > 65535
Function: CTO
Feature: Temperature
Value: 6500K - 2700K

If i set this in the Fixture builder it sets the CTO wheel default at 5600K which is in line with the new coloring system. I was was wondering why this changed in the conversion from Fixture Library version 3 to version 4.

The range of real world values was vastly increased in the newer library version that is used with Hog OS v4+.

This includes the Kelvin range.