Bug Report - All Hog V5 doesn't support hog 4 playback wing on hog 4 fullboar

This should be corrected in the recent v5.2.0 release, now available on the web site for download.

Sadly, it is not. Just installed 5.2 and then spent half an hour getting it to recognise the wing as a custom screen. It does not recognise the correct resolution, so even with the grid set to large much of the screen is unused. It can be calibrated to be usuable, but it is far from ideal.

Hello, Did you set it to "Wing Rev 1" or "Wing Rev 2" depending on your model?  Which DVI port are you using?  I was able to get a FB4 and Rev 1 Master wing set up correctly out of DVI Port 1 on v5.2

I tried all available revisions, and only "custom" actually sent a video signal to the wing. I didn't try the other DVI port because we have a working monitor on that port, and I didn't want to risk losing connectivity to that screen. Also, our wing is on the right, which shouldn't matter, but if the DVI port matters, then so might this. 

I tried all available revisions, and only "custom" actually sent a video signal to the wing. I didn't try the other DVI port because we have a working monitor on that port, and I didn't want to risk losing connectivity to that screen. Also, our wing is on the right, which shouldn't matter, but if the DVI port matters, then so might this.