using the expression with emphasis without the server??
Can you use the expression with emphasis without the server??? Instead of having the emphasis system just basically have the expression 3? Is this possible or am I just way off base?
If you are using the Expression in stand-alone mode on the existing and current system, hopefully the Expression with Emphasis is hooked up to the current control system via the DMX output ports on the back of the facepanel - Expression console. And/or that you intend to use the Expression as a stand-alone console outputting DMX directly.
The Emphasis server does not have DMX out, sending all control data to a Net2 system via the Ethernet port and hub/switch. Thus, should that be your current control configuration, the Expression in stand-alone mode cannot talk to a Net2 system. You would need to use a Net2 node receiving the DMX output from the Expression DMX ports to connect to a Net2 system.
All of which requires me to ask the question - Why do you need/want to disconnect Emphasis ?.
Had an issue patching some elipscans in not to long ago. We don't use the previs system normally...so it becomes something extra that sits around or has to get moved. We are not currently using any net2 nodes...the list goes on...its a decent system but often times having the server attached even if it is remotely via installed etcnet jacks, just makes the system a little more clunky. So thats why I'm curious if I can some people just don't like this particular system for whatever reason so I decided to see if I could remove it when it wasn't needed.
Roger - did you try it? Steve makes a good point about the DMX out. I have done this in exactly one venue. We needed to use Net2 node inputs to get DMX to where we needed it and we needed to find a way to hook up an RFU and a video node. Doing this also required a little "being smarter than the system." Obviously most Emphasis installs are not designed for you to "downgrade" on a regular basis.
We were able to succeed, eventually after some experimentation. How did you make out?
Haven't had a chance to try it yet it may be a little while before I do unfortunately thanks for all the good advice though guys. Pretty much all of our installation is based around the use of wired dmx (with no nodes) so not having some of the features available to us isn't really gonna bother me. So I really wouldn't call it an emphasis install per say, you could pretty much put any console in with minimal hookup headaches other than the need to have a 4 channel dmx and 1 channel rfu snake to run to wherever you put the board in the house( which can get pretty long).
Haven't had a chance to try it yet it may be a little while before I do unfortunately thanks for all the good advice though guys. Pretty much all of our installation is based around the use of wired dmx (with no nodes) so not having some of the features available to us isn't really gonna bother me. So I really wouldn't call it an emphasis install per say, you could pretty much put any console in with minimal hookup headaches other than the need to have a 4 channel dmx and 1 channel rfu snake to run to wherever you put the board in the house( which can get pretty long).
