I am running some D60 Lustr pars on an Obession II. My designer is using the color picker on the Eos/Ion offline to choose his pallets. What I'm trying to do is convert the numbers the emulator is giving me for Hue & Saturation into DMX percentages I can plug into my O2.
Anyone done anything like this before or have tips on a converter app or something? I'm running the Pars in 15 channel HSIC mode because the board wasn't communicating with them in RGB mode.
Thanks!
Set up the fixtures in Direct mode, and patch at least one D60 in direct mode in Eos Offline.
Build yourself a custom profile for the O2 that matches the DMX map for the D60 in direct mode (7 8-bit color channels + intensity)
In Eos Offline, select a D60 channel, then use the gel library to pick a color. It should look something like this screen:
Hold down "Shift" and "D" on your keyboard, and it will show you the underlying color percentage data. It should look like this screen:
Then type those numbers (percentages) into Obsession. Ignore Hue and Saturation data.
Hope that helps,
~P
Set up the fixtures in Direct mode, and patch at least one D60 in direct mode in Eos Offline.
Build yourself a custom profile for the O2 that matches the DMX map for the D60 in direct mode (7 8-bit color channels + intensity)
In Eos Offline, select a D60 channel, then use the gel library to pick a color. It should look something like this screen:
Hold down "Shift" and "D" on your keyboard, and it will show you the underlying color percentage data. It should look like this screen:
Then type those numbers (percentages) into Obsession. Ignore Hue and Saturation data.
Hope that helps,
~P
