Express F/X

When I run an F/X cue, the channels from the previous cue get grabbed and held at level as if they were recorded in the F/X as static channels (which cant be done) is it possible to have a conventional cue CrossFade to an F/X cue, or is it just the way these boards run. I have made a work around via point cue, but its just not to pretty. Any Ideas???

Parents

jpgagnon over 15 years ago

John I agree about the subs. It's the easiest way on the express to make effects. You can link the macros that trigger the sub just like any other cue. LINK + ENTER MACRO + enter the macro #. I use numbering schemes like: Sub 1 would be turned on my Macro # 101, turned off by Macro # 901. Just to keep it clear what the link is doing. Just make sure you turn off the sub if it's running before you re-record a cue. you will record whatever levels are present at the time you hit ENTER.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
DBFJohn over 15 years ago in reply to jpgagnon

Thanks Guys, I use to run an O2 the same way with F/X on subs and Macros on/off, I was just hoping I was missing something, but I guess it really is a quirk in the sofware.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

DBFJohn over 15 years ago in reply to jpgagnon

Thanks Guys, I use to run an O2 the same way with F/X on subs and Macros on/off, I was just hoping I was missing something, but I guess it really is a quirk in the sofware.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data