• Date
    Kent@Uvic
  • Date
  • Replies 2 replies
  • Subscribers 53 subscribers
  • Views 4318 views
  • Users 0 members are here

Express: Submaster Problem

Hello,

Has anyone Encountered this issue?:  Assigning a Sub and when you manual bring up the slider none of the channels assigned to it react.  This is the first time this has happend so not sure why its not working.

This is How I addressed the Sub.

 Sub-master Page 1:  [Channel] 81 [Thur] 86 @ 50% [enter] <record> [Sub 1] <Bump1>
Also Tried: [Channel] 81 [Thur] 86 @ 50% <record> [Sub 1] <Enter>
tried this in Stage and in Blind Mode no luck.. :(

Then Bump LED is Lit however when I press the bump or bring the slider up I get nothing.

Anyone know why this may be happening? I have tried Resetting Console to Factory Defaults, no luck.

I know the Fixtures work, because when I individually Assign them [channel] 81 [Thur] 86 @ 50% <enter> on the key pad, They respond no problems.

Suggestions?

Thanks in advance,



[edited by: Kent@Uvic at 5:25 PM (GMT -6) on Sat, Jan 8 2011]
Parents

  • Two thoughts --

    First, are you sure that you've released channels before bringing them up?  If you're recording a sub at 50%, and the lights are captured at 50%, the sub won't grab the intensities until they are released.

    Second, what is the submaster doing?  Look at the sub list [Live] [S7] (More SK) [S2] (Sub List).  See what the console is reporting for the sub's value

    It'll look something like this:

Reply

  • Two thoughts --

    First, are you sure that you've released channels before bringing them up?  If you're recording a sub at 50%, and the lights are captured at 50%, the sub won't grab the intensities until they are released.

    Second, what is the submaster doing?  Look at the sub list [Live] [S7] (More SK) [S2] (Sub List).  See what the console is reporting for the sub's value

    It'll look something like this:

Children
No Data
Related

www.etcconnect.com