HOG 1000 <PIG + Pallete>

hey all

Using hog 1000 current version. Normally when you select a fixture from a group pallete, or selecting beam, colour or position palletes you can un-select by holding PIG and pressing the pallete button again. However, when you type into the console GOTO (insert cue number) and press enter, it does not allow you to unselect. Even if I HOG + RELEASE and/or CLEAR/RESTORE the programmer, then reselect fixture, and/or attributes I can not get it to work. I have had it happen in shows a few times when busking and at some point (not sure what I do) it returns.

Any help on this would be much appreciated.

PS. It has happened consistently after Clean starts + on different shows so none of that effecting it.
Parents
  • 0
    Dave,

    I'm able to reproduce your problem. This looks like it's an issue that has been around for quite a while now. The bug has been logged in our tracking system, but the Wholehog 2 operating system is a completed product that is no longer in development. Currently, the only changes being made to Hog 2 software are library updates. If you find yourself in a situation where pig+palette doesn't work, it will probably be easiest to hold down the undo key and touch parameter wheels to knock values out of the programmer.
Reply
  • 0
    Dave,

    I'm able to reproduce your problem. This looks like it's an issue that has been around for quite a while now. The bug has been logged in our tracking system, but the Wholehog 2 operating system is a completed product that is no longer in development. Currently, the only changes being made to Hog 2 software are library updates. If you find yourself in a situation where pig+palette doesn't work, it will probably be easiest to hold down the undo key and touch parameter wheels to knock values out of the programmer.
Children
No Data
Related

www.etcconnect.com