I just purchased a remote focus unit for my Hog II. I connected it using a true 5 pin DMX cable and it did not power up, nor did the console see it. Am i doing somthing wrong? I have never tried connecting anything to the expansion port on this hog so i do not know if it works, or if the remote works. The remote was still in the factory packaging from high end when i recieved it.
Hello, the Fuse for the Expansion Port is actually on the Back Panel I/O PCB. If you remove the ribbon cable on the left side of the PCB there are two black plastic boxes with fuses in the lids. Remove the top, or lid, and the fuse will come out with it. The Expansion port is F2 I believe.
Hello, the Fuse for the Expansion Port is actually on the Back Panel I/O PCB. If you remove the ribbon cable on the left side of the PCB there are two black plastic boxes with fuses in the lids. Remove the top, or lid, and the fuse will come out with it. The Expansion port is F2 I believe.
