Recording Palette adds parameters

is there any other channel selected before that?
Why not try having the output window on screen and try it again.
That you can see what channel is modified when you have it in the programmer.

try clear the programmer and try again while monitoring the output window

More info:
When i press in numbers to turn them up or down, for an example i press:

12 @ 77

The commandline says:
Output 1 12 @ 77

Martinbraad,

You said "...but it seems that when I try to create a palette with all 3 desk channels at full and record, I somehow manage to record all 51 of my desk channels into the palette."

This is happening because all three channels are the same value. On Wholehog 2 if you have one or multiple fixtures with the same value, it will "auto-expand" this palette to work with all fixtures of that same type. So this makes sense what you are seeing.

The way around this is to include in the palette one other fixture or parameter at a different value. Then the palette will not auto-expand and will only apply to the fixtures within the palette. SO if you have any automated fixtures I would touce one of their timing or control channels at defaults and record this "use B" into the palette (or you can use another desk channel not at full or any other fixture). Then the palette will only apply to the fixutres you want and this one oddball...

Thanks Brad. That worked like a charm!

Dan

Brad,
Thinking about this a little more...if I create an "intensity" palette with a single desk channel@Full, the Hog2 will automatically create the palette with every desk channel@Full unless I add another desk channel at a different level or a different fixture parameter?

Dan,

You are correct.