Martix X-10 Extreme Help

Hey all,

Our church is using a few Martin x-10's and the fixture library that I have (I think it came from HES) allows smooth color changes from 1 color to the next but not the effects. They snap only and I've tried manipulating the defaults. What I would really like is to be able to adjust the color and effect gobos at any point of the rotation not just from position to position (i.e. between effect 3 and effect 4). Can anyone give me some pointers or even a lib file that can do this?

Thanks.

0 marty postma - Former HES Forum Member over 17 years ago

try setting the PATH to linear for this parameter, usually parameters like this are set to START by default...if this does not work the fixture itself may not be capable of changing this way.

Hope this helps:)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 rallyu - Former HES Forum Member over 17 years ago

Thanks Marty for the reply.

I have the path set to linear already. We used these same light with an ETC Express lightboard before we upped to a Hog (that sounds a little strange word play huh?) anyhow on the ETC board I was able to stop either the color or effect wheel with a fader will programming (0%-100%). Each % was a spot along the total % of wheel rotation. So you could have part of 2 adjacent colors visable, the same went for the efects. I want to be able to do this as well on the :hogsign:

Thanks
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 marty postma - Former HES Forum Member over 17 years ago

If you have already set the PATH to be linear under the Edit Fixtures menu, then you may need to build yourself a custom fixture profile that allows you to do this.

www.flyingpig.com/support/hog2/downloads/Wholehog2Libraries.shtml

download the manual from the bottom of this page to get instructions on how to do this.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel