Martix X-10 Extreme Help

Hey all,

Our church is using a few Martin x-10's and the fixture library that I have (I think it came from HES) allows smooth color changes from 1 color to the next but not the effects. They snap only and I've tried manipulating the defaults. What I would really like is to be able to adjust the color and effect gobos at any point of the rotation not just from position to position (i.e. between effect 3 and effect 4). Can anyone give me some pointers or even a lib file that can do this?

Thanks.
Parents
  • 0
    Thanks Marty for the reply.

    I have the path set to linear already. We used these same light with an ETC Express lightboard before we upped to a Hog (that sounds a little strange word play huh?) anyhow on the ETC board I was able to stop either the color or effect wheel with a fader will programming (0%-100%). Each % was a spot along the total % of wheel rotation. So you could have part of 2 adjacent colors visable, the same went for the efects. I want to be able to do this as well on the :hogsign:

    Thanks
Reply
  • 0
    Thanks Marty for the reply.

    I have the path set to linear already. We used these same light with an ETC Express lightboard before we upped to a Hog (that sounds a little strange word play huh?) anyhow on the ETC board I was able to stop either the color or effect wheel with a fader will programming (0%-100%). Each % was a spot along the total % of wheel rotation. So you could have part of 2 adjacent colors visable, the same went for the efects. I want to be able to do this as well on the :hogsign:

    Thanks
Children
No Data
Related

www.etcconnect.com