When i connect my Hog remote the remote says its searching for console and the console locks up. If i turn it off and then back on it locks up when it says testing memory......looks ok or something like that. The only way i get it unstuck is when i push the reset button in the back, but every time i have done that i unplug the remote first. Any idea on what is going on. I checked the fuses and the desklamp fuse is blown, i dont know if that makes a difference or not. I will replace it tomm, but i really need the remote, i hate making 100 trips back and forth from the catwalk to the booth.
A couple of possibilities are a faulty remote cable or a problem on the rear panel pcb of the console. It may also be the remote itself. You may want to try a different cable and if that doesn't help try the remote on a different console if you have access to one to help isolate the problem to the console or the remote.
A couple of possibilities are a faulty remote cable or a problem on the rear panel pcb of the console. It may also be the remote itself. You may want to try a different cable and if that doesn't help try the remote on a different console if you have access to one to help isolate the problem to the console or the remote.
