Echelon

I have just bought a Echelon 1k and I am having a lot of problems trying to make a new fixture lib. I have used the fixture generator link on the flyingpig.com website but every time I try to load my new fixture I simply can not find it on the fixture list. The light is made buy star and it is a copy of a mac 250 kr. I have tried to merge it with show and just load it a new lib but I can never find it. I have attached the fixture paramerters if anyone can help.


//-------------------------------------------------------
fixture = star
manufacturer = 76
product = 1
name = star250
yoke = yes
//Created using Denis Hessberger's Wholehog2 Library Generator application!

output = dmx
parameter = Strobe
default = 220
highlight = 220
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 15,closed
range = 16, 207,strobe
range = 208, 248,open
range = 249, 252,reset
range = 253, 255,open
parameter = Intensity
default = 255
highlight = 255
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 255,%
parameter = Intensity
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp16bit
range = 0, 65536,%
parameter = Color
default = 195
highlight = 195
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 153,scroll
range = 154, 158,darklav
range = 159, 163,yellow
range = 164, 168,magenta
range = 169, 173,amber
range = 174, 178,green
range = 179, 183,lightlav
range = 184, 188,red
range = 189, 199,white
range = 200, 227,cwscroll
range = 228, 255,ccwscrol
parameter = Color
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp16bit
range = 0, 65536,%
parameter = Gobo
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 4,open
range = 5, 9,1
range = 10, 14,2
range = 15, 19,3
range = 20, 24,4
range = 25, 29,5
range = 30, 34,6
range = 35, 42,7
range = 43, 50,1>
range = 51, 58,2>
range = 59, 66,3>
range = 67, 74,4>
range = 75, 82,5>
range = 83, 90,6>
range = 91, 104,7>
range = 105, 119,7shake
range = 120, 134,6shake
range = 135, 149,5shake
range = 150, 164,4shake
range = 165, 179,3shake
range = 180, 194,2shake
range = 195, 209,1shake
range = 210, 232,cwscroll
range = 233, 255,ccwscrol
parameter = Gobo <>
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp16bit
range = 0, 65536,%
parameter = Focus
default = 128
highlight = 128
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 255,%
parameter = Fx/prism
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 31,out
range = 32, 255,in
parameter = Fx/prism<>
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 0,no rot
range = 1, 85,cwrot
range = 86, 170,ccwrot
range = 171, 178,no rot
range = 179, 255,random
parameter = Pan
default = 128
highlight = 128
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 255,%
parameter = Tilt
default = 128
highlight = 128
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 255,%
parameter = Panfine
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp16bit
range = 0, 65536,%
parameter = Tiltfine
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp16bit
range = 0, 65536,%
parameter = P/t speed
default = 0
highlight = 0
crossfade = 0
movement = normal
type = ltp8bit
range = 0, 255,%
Parents
  • 0
    what I remember from my old echelon is:

    first leave a 'return' between all the different parameters ( like a 'return' between the last parameter 'range = 0, 65536,%' from panfine and the start for tilt fine.

    then put a copy from your desk-lib-file on a computer, and also this new-to-import-file.
    In a text editor copy all the parameters for your Star250 and paste them in your desk-lib-file.
    Then on top of the desk-lib-file you have to increase the count of fixtures with 1

    put this new desk-lib-file in your jands and the Star250 should be visible. If you get errors during start-up / show-load: I don't know this fixture, so if the dmx-datasheet is o.k., you'll have to find out...

    Peer
Reply
  • 0
    what I remember from my old echelon is:

    first leave a 'return' between all the different parameters ( like a 'return' between the last parameter 'range = 0, 65536,%' from panfine and the start for tilt fine.

    then put a copy from your desk-lib-file on a computer, and also this new-to-import-file.
    In a text editor copy all the parameters for your Star250 and paste them in your desk-lib-file.
    Then on top of the desk-lib-file you have to increase the count of fixtures with 1

    put this new desk-lib-file in your jands and the Star250 should be visible. If you get errors during start-up / show-load: I don't know this fixture, so if the dmx-datasheet is o.k., you'll have to find out...

    Peer
Children
No Data
Related

www.etcconnect.com