Jands Echelon / Hog 1K - Create Fixture Profile

Hi everyone,

So the venue i operate at use a Jands Echelon board (rebranded Hog 1000) & the venue will very soon be getting some new LED moving head wash fixtures, however they are a generic unbranded fixture that do not have a fixture profile.

The company providing them said they can give me the DMX chart & i will have to create my own fixture profile, so just wanting to get some tips on how i would do this?, all the other fixtures in use at the venue have fixture profiles in the board already.

Some step by step instructions would be a massive massive help.

Cheers.
Parents
  • We just bought a used Hog 1000 and im tring to set up fixture profiles for the Chauvet COLORado Batten 72. But every time i go to load it, it is giving me an error. All of the codes are the same as another rgbaw fixture i loaded just fine. Any thoughts? I have included the codes.

    //-------------------------------------------------
    fixture = Batten Block2
    manufacturer = 10
    product = 28
    name = Batten Block 2
    output = dmx

    parameter = Red1
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Green1
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Blue1
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = White1
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Amber1
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Red2
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Green2
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Blue2
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = White2
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Amber2
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Red3
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Green3
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Blue3
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = White3
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Amber3
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %
Reply
  • We just bought a used Hog 1000 and im tring to set up fixture profiles for the Chauvet COLORado Batten 72. But every time i go to load it, it is giving me an error. All of the codes are the same as another rgbaw fixture i loaded just fine. Any thoughts? I have included the codes.

    //-------------------------------------------------
    fixture = Batten Block2
    manufacturer = 10
    product = 28
    name = Batten Block 2
    output = dmx

    parameter = Red1
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Green1
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Blue1
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = White1
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Amber1
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Red2
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Green2
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Blue2
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = White2
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Amber2
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Red3
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Green3
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Blue3
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = White3
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %

    parameter = Amber3
    default = 0
    highlight = 255
    crossfade = 0
    type = ltp8bit
    range = 0, 255, %
Children
No Data
Related