Order of Modes on Parameters

Is there a way to change the order of the different modes on parameters? For example, I can't count how many times I have selected Beam then moved the Gobo <> parameter wheel only to notice after I touched it that the "mode" for that parameter was Index instead of Rotate. There are many shows where I am not interested in the Index mode so I would like to be able to put the Rotate mode first. I am using the Hog3 PC v2.2.2 (b1809).

Thanks,
Kevin Montagne
kevin (at) litkam (dot) com
Parents
  • 0
    Brad, thanks for the reply. I am talking about the different modes on a single parameter wheel. I looked at the Wheelset Editor and wanted to make sure I was not missing something. I like Lee's suggestion of having the Programmer remember the individual mode last chosen for each parameter wheel. I would assume you would want to make it a preference setting since some people may have come to depend on its current behavior.

    Thanks,
    Kevin Montagne
    kevin (at) litkam (dot) com
Reply
  • 0
    Brad, thanks for the reply. I am talking about the different modes on a single parameter wheel. I looked at the Wheelset Editor and wanted to make sure I was not missing something. I like Lee's suggestion of having the Programmer remember the individual mode last chosen for each parameter wheel. I would assume you would want to make it a preference setting since some people may have come to depend on its current behavior.

    Thanks,
    Kevin Montagne
    kevin (at) litkam (dot) com
Children
No Data
Related

www.etcconnect.com